Nymph Head Articulated Wiggle Tail Shank- Articulation for smaller flies now made easy. The Wiggle-tail Shank offers a convenient way to tie articulated "wiggle-tails" or rear body sections on a variety of smaller trout flies. 20 per bag.
This innovative product eliminates the need to "sacrifice a hook" to get a shank. A single product flexible enough for flies in the #6 to #18 hook size range. The long shank is easily trimmed to the tail length needed to match the size of fly being tied.
By design the shank can be bent if a curved tail is desired on the fly. Wire diameter thin enough to tie articulated flies as small as #18 and even light enough for dry flies.
The Articulated Wiggle-Tail Shank is a simple product giving fly tiers new opportunities for creativity.
Q: Are wiggle-tails a new fly tying concept?
A: No, for many years fly tiers have been tying these types of flies by cutting off the bend of a hook in order to get a shank upon which to tie and attached the tail to another hook. The Wiggle-Tail Shank is simply a ready-to-tie shank that eliminates the need (and cost) of sacrificing a hook and is also flexible enough to be used for a wide range of fly sizes.
Q: Why is this single size product flexible enough to tie flies in the #6 to #18 hook size range?
A: The Wiggle-Tail Shank has a wire diameter roughly the equivalent of a #18 hook, but a length of 20mm which is roughly equivalent to a #6 hook. The unhardened steel shank can easily be cut using a small pair of side-cutters to match the size of fly you want to tie . Because of the thin wire diameter, you will always have a thin, elegant tail section of your fly even for the smallest of flies.
For example: You may want to tie a large, articulated stonefly using a #6 hook and the 20mm shank length may be the perfect size for a nice long body. Then you want to tie a size # 16 articulated emerger, so you then simply tie the tail the correct size (maybe 8mm long) and then cut-off the excess shank you dont need. The tail of your emerger has the right proportion and taper because it is tied on the shank (now only 8mm long) which is still the equivalent diameter of a #18 hook.
Q: Can the shank be bent?
A: Yes, the shank is made of spring steel which means it is rigid enough to be placed in a vice to tie your tail. HOWEVER, under some pressure it can be bent if you desire a curved tail on your fly. Tie the tail, then bend it. You are no longer restricted to having only a straight tail on your flies. Be creative!
Q: Could dry flies be tied using the shank?
A: Yes, because the wire diameter is roughly the equivalent of a #18 hook it is very thin and light. There is no reason that larger size dry flies or foam flies could not have an articulated tail or rear section. A good example of this is Vince Wilcoxs recent article entitled Articulation Perfection that appeared in the Winter 2011 Fly Tyer Magazine. Click on it to read the full article and detailed step-by-step instructions.
Find Similar Products by Category
- Fly Tying Supplies & Materials
- Fly Tying Hooks, Thread, Floss & Wire
- Fly Tying Hooks
- Specialty / Articulated Shanks